K 1500 Yukon XL 4WD V8-5.3L VIN T (2001)
9. Apply threadlock GM P/N 12345382 or equivalent to the threads of the bracket bolts.
10. Install the ignition coils and bracket to the rocker arm cover.
11. Install the ignition coil bracket studs to the rocker cover.
-
Tighten the ignition coil bracket studs to 12 Nm (106 inch lbs.).
12. Install the heater hose bracket and nut.
-
Tighten the heater hose bracket nut to 9 Nm (80 inch lbs.).
13. Position the surge tank/heater hoses to the heater hose bracket.
14. Install pipe (1).
15. Position the AIR pipe clamps at the check valves.
16. Install the AIR pipe hose to the AIR pipe.
17. Position the AIR pipe hose clamp at the pipe.
