K 1500 Yukon XL 4WD V8-5.3L VIN T (2001)
Notice: Refer to Fastener Notice in Service Precautions.
9. Install the bottom bolt on the left side until snug.
9.1.
Tighten the oil pan and oil pan-to-oil pan front cover bolts to 25 Nm (18 ft. lbs.).
9.2.
Tighten the oil pan-to-rear cover bolts to 12 Nm (106 inch lbs.).
9.3.
Tighten the bellhousing, converter cover, and transmission bolts/stud to 50 Nm (37 ft. lbs.).
10. Install the positive battery cable clip and bolt to the oil pan.
-
Tighten the positive battery cable clip bolt to 9 Nm (80 inch lbs.).
11. Install the engine oil cooler lines to the positive battery cable clip.
12. Install the following to the positive battery cable clip:
-
Engine wiring harness clip
-
Positive battery cable clip