K 1500 Yukon XL 4WD V8-5.3L VIN T (2001)
Pitman Arm: Service and Repair
-
Tools Required
-
J 24319-B Universal Steering Linkage Puller
-
J 29107-A Universal Pitman Arm Puller
-
J 29193 Steering Linkage Installer (12 mm)
-
J 29194 Steering Linkage Installer (14 mm)
Removal Procedure
1. Raise the vehicle. Refer to Vehicle Lifting.
2. Remove the engine protection shield, if equipped. Refer to Engine Protection Shield Replacement in Body and Frame.
3. Remove the relay rod nut (8} from the pitman arm ball stud (2). Do not reuse the nut.
Notice: Do not hammer on the pitman arm, pitman arm shaft or puller. Damage to the pitman arm or steering gear may result.
4. Use the J 24319-01 in order to remove the relay rod from the pitman arm ball stud.