K 2500 Suburban 4WD V8-454 7.4L VIN N TBI (1995)
Pilot Bearing: Service and Repair
Transmission Replacement
TRANSMISSION REPLACEMENT
1. Remove shift control lever.
2. Raise the vehicle.
3. Drain transmission oil.
4. Remove propeller shaft.
5. Remove transfer case, if used.
6. Remove parking brake and controls, if used.
7. Remove exhaust pipes, if necessary.
8. Remove electrical harnesses, as necessary.
9. Remove clutch slave cylinder and lay it aside.
10. Remove bolts and the inspection cover (RPO MG5).
Important
-
Note the positions of any lines or wires before removing them.
-
Support the transmission with a jack.
11. Remove cross member.