K 2500 Suburban 4WD V8-5.7L VIN R (1999)
Power Door Lock Switch: Service and Repair
Power Door Lock Switch Replacement
Removal Procedure
1. Disconnect the negative battery cable.
2. Remove the power accessory switch plate.
3. Disconnect the power door lock switch wiring connector.
4. Carefully bend the retaining tabs of the power door lock switch outward while pushing the switch out of the plate.
Remove the switch.
Installation Procedure
1. Install the power door lock switch.
2. Connect the power door lock switch wiring connector.
3. Install the power accessory switch plate.
4. Connect the negative battery cable.
