K 2500 Suburban 4WD V8-5.7L VIN R (1999)
Brake Pedal Assy: Service and Repair
REMOVAL PROCEDURE
CAUTION: Refer to Battery Disconnect Caution in Service Precautions.
1. Disconnect the negative battery cable.
2. Disable the SIR.
3. Remove the electrical connector from the stoplamp switch.
4. Remove the pushrod retainer.
5. Remove the stoplamp switch.
6. Remove the pushrod.
7. Remove the nut.
8. Remove the brake pedal bolt.
9. Remove the bushings and the spacer.