K 2500 Suburban 4WD V8-5.7L VIN R (1999)
4. Remove the inboard shoe and the lining.
5. Remove the bolt boots.
6. Remove the mounting bolt seals.
7. Remove the bushings.
8. Inspect the mounting bolts, the key, the spring, and the sleeves for any corrosion. Do not attempt to polish away any corrosion. Replace any
corroded parts.
IMPORTANT: Clean the caliper assembly. Install a new brake hardware kit any time it is necessary to remove it from the rotor.
9. Inspect the bolt boots for any nicks, cuts, or corrosion. Replace any corroded parts.
INSTALLATION PROCEDURE
