K 2500 Suburban 4WD V8-5.7L VIN R (1999)
Backing Plate: Service and Repair
Brake Backing Plate Replacement (Duo-Servo Drum Brakes)
REMOVAL PROCEDURE
1. Remove the linings.
2. Remove the wheel cylinder.
3. Remove the bolts.
4. Remove the washers.
5. Remove the backing plate.
INSTALLATION PROCEDURE
1. Install the backing plate.
NOTICE: Refer to Fastener Notice in Service Precautions.
2. Install the bolts and the washers.
Tighten
Tighten the bolts to 160 Nm (118 lb ft).
3. Install the wheel cylinder.
4. Install the linings.
5. Adjust the brakes.
6. Bleed the brake system.
