K 2500 Suburban 4WD V8-5.7L VIN R (1999)
Parking Brake Drum: Service and Repair
REMOVAL PROCEDURE
1. Release the parking brake.
2. Raise the vehicle and support the vehicle with safety stands.
3. Remove the propeller shaft.
4. Remove the nut and washer if equipped with a manual transmission.
5. Remove the bolt and washer if equipped with an automatic transmission.
6. Disconnect the drum and yoke assembly.
7. Remove the bolts and the washers.
8. Remove the drum from the yoke.
INSTALLATION PROCEDURE
1. Connect the drum to the yoke.
NOTICE: Refer to Fastener Notice in Service Precautions.