K 2500 Suburban 4WD V8-5.7L VIN R (1999)
Spot Lamp: Service and Repair
Spotlamp Replacement
REMOVAL PROCEDURE
CAUTION: Refer to Battery Disconnect Caution in Cautions and Notices.
1. Disconnect the negative battery cable(s).
2. Remove the spotlamp wedge key screw.
3. Remove the handle from the outer tube shaft.
4. Remove the collar.
5. Remove the wire clip.
6. Disconnect the electrical connector.
7. Remove the bracket set screw.
8. Pull the spotlamp and shaft out of the bracket.
9. Remove the spotlamp mounting bracket screws.