K 2500 Suburban 4WD V8-5.7L VIN R (1999)
Turn Signal Lamp: Service and Repair
Park/Turn Signal Lamp Replacement (Base with Composite)
REMOVAL PROCEDURE
1. Make sure the headlamp switch is in the OFF position.
2. Remove the screws.
3. Remove the park/turn signal lamp assembly.
4. Disconnect the electrical connector.
5. Remove the bulbs from the assembly.
INSTALLATION PROCEDURE
1. Install the bulbs to the park/turn signal lamp assembly.
2. Install the lamp assembly.
3. Connect the park/turn signal lamp connector.
4. Install the screws.
