K 2500 Suburban 4WD V8-5.7L VIN R (1999)
4. Install the air cleaner to the wheel housing by aligning the tab on the intake duct with the wheel housing opening.
5. Align the serrated pin with the mounting bracket and install by pushing down until the serrated pin is firmly seated in the bracket.
NOTE: Refer to Fastener Notice in Cautions and Notices.
6. Install the MAF sensor to the air cleaner outlet duct.
Tighten
Tighten the clamp to 3-5 N.m (27-44 lb in).
7. Install the IAT sensor harness.
8. Connect the negative battery cable.
