K 2500 Suburban 4WD V8-5.7L VIN R (1999)
Clockspring Assembly / Spiral Cable: Service and Repair
SIR Module Coil Assembly
Removal Procedure
Important: Disable the SIR system.
1. Remove the steering wheel assembly.
2. Remove the tilt lever, if equipped.
3. Remove the multi-function lever.
4. Remove the upper and lower shrouds.
5. Pop the wire harness assembly (4) out of the wire harness strap (5).
6. Remove the 3 wire harness straps (3) from the wire harness assembly.
7. Remove the wire harness strap (2) from the upper tilt head assembly (1).
8. Remove the coil assembly retaining clip (1).
9. Remove the coil assembly (2).
10. Remove the wave washer (3).
Installation Procedure
