K 2500 Suburban 4WD V8-5.7L VIN R (1999)
3. Remove the bolt retaining the retractor to the floor panel.
4. Remove the retractor from the vehicle.
5. Remove the cover from the buckle assembly which conceals the nut.
6. Remove the nut from the buckle assembly to floor weld stud.
7. Remove the seat belt warning wire from the buckle assembly on the driver's side only.
8. Remove the buckle assembly from the vehicle.
Extended Cab With 3RD Door
Caution: Refer to Belt Replacement Caution in Cautions and Notices.
Notice: Refer to Servicing and Replacing Seat Belt Notice in Cautions and Notices.
