gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

Sensors and Switches - Ignition System > < Throttle Position (TP) Sensor-1|Page 2059
Page 2
background image

1. With the throttle valve closed, install the TP sensor on the throttle shaft.

Rotate the TP sensor counterclockwise in order to align the mounting holes.

NOTE:  Refer to Fastener Notice in Cautions and Notices.

2. Install the TP sensor attaching fasteners.

Tighten
Tighten the fasteners to 2.0 N.m (18.0 lb in).

3. Install the TP sensor harness connector.
4. Connect the negative battery cable.

Sensors and Switches - Ignition System > < Throttle Position (TP) Sensor-1|Page 2059