K 2500 Suburban 4WD V8-5.7L VIN R (1999)
Power Window Switch: Service and Repair
Rear Door Power Window Switch Replacement
REMOVAL PROCEDURE
CAUTION: Refer to Battery Disconnect Caution in Cautions and Notices.
1. Disconnect the negative battery cable.
2. Remove the switch mounting panel.
3. Use a flat blade tool in order to carefully pry the door power window switch from the door trim panel.
4. Disconnect the power accessory electrical connectors from the switch.
INSTALLATION PROCEDURE
1. Connect the power accessory electrical connectors to the switch.
2. Install the switch to the door trim panel. Snap the switch in place.
3. Connect the negative battery cable.
