K 2500 Suburban 4WD V8-5.7L VIN R (1999)
5. Rotate the master cylinder body 45° clockwise in order to remove the master cylinder from the cowl panel.
Installation Procedure
1. Position the master cylinder to the cowl panel.
Important: Do not over rotate the master cylinder or damage will occur.
2. Install the master cylinder by holding it at a 45° angle and rotating it counterclockwise.
3. Connect the hydraulic tube to the concentric slave cylinder quick connect coupling.
4. Install the tube clips to the wiring harness bracket and the sheet metal.
5. Secure the push rod to the clutch pedal.
6. Check the reservoir to ensure the oil level is at the full level. Use Delco Supreme II Brake Fluid (GM P/N 1052535) or an equivalent.
