K 2500 Suburban 4WD V8-5.7L VIN R (1999)
Axle Bearing: Service and Repair
9.5 Inch Axle
Rear Oil Seal and/or Bearing Replacement
Tools Required
^ J 8092 Universal Driver Handle 3/4 in-10
^ J 29709 Wheel Bearing Installer
^ J 29712 Wheel Bearing Remover
^ J 29713 Axle Seal Installer
Removal Procedure
1. Raise the vehicle.
2. Remove the tire and wheel assembly.
3. Remove the rear axle housing cover.
4. Remove the axle shaft.
5. Remove the axle shaft seal and the bearing from the axle housing using the J 29712.
Installation Procedure
1. Install the axle shaft bearing using the J 29709 (1) and the J 8092 (2).
