K 2500 Suburban 4WD V8-6.5L DSL Turbo VIN F (1996)
Blower Motor Resistor: Service and Repair
With Air Conditioning
Main Unit
1 Screw, 2 Resistor, 3 Relay Bracket, 4 Relay
Remove or Disconnect
1. Negative battery cable.
2. Roll instrument panel back.
3. Plenum tray.
4. Electrical connectors, as necessary.
5. Screws.
6. Blower motor resistor.
Install or Connect
1. Blower motor resistor.
2. Tighten screws to 1.9 Nm (17 lb in).
3. Electrical connectors, as necessary.
4. Plenum tray.
5. Roll instrument panel forward.
6. Negative battery cable.
-
Check circuit operation.
Auxiliary Unit
Auxiliary Heater Module
Remove or Disconnect
1. Negative battery cable.