K 2500 Truck 4WD V8-305 5.0L VIN M SFI (1998)
Timing Chain: Service and Repair
REMOVAL PROCEDURE
^
Tools Required
-
J 5825-A Crankshaft Sprocket Remover
IMPORTANT: Once the engine front cover is removed, do not re-install it.
1. Always install a NEW engine front cover.
2. Remove the engine front cover.
3. Remove the crankshaft position reluctor ring.
4. Rotate the crankshaft until:
-
The number one cylinder is at top dead center (TDC) of the compression stroke.
-
The timing marks on both sprockets line up.
5. Remove the camshaft sprocket bolts.
6. Remove the camshaft sprocket and the timing chain.