K 2500 Truck 4WD V8-305 5.0L VIN M SFI (1998)
Description
2. Install the seat belt warning wire to the buckle assembly on the driver's side only.
3. Install the nut to the buckle assembly and onto the floor panel weld stud.
Tighten
^
Tighten the nut to 42 N.m (31 lb ft).
NOTICE: Refer to Fastener Notice in Service Precautions.
4. Install the cover assembly over the nut.
Description
5. Install the retractor and belt to the rear seat access panel.
6. Install the bolt through the retractor into the rear seat access panel.
Tighten
^
Tighten the bolt to 55 N.m (41 lb ft).
Description
7. Install the bolt through the anchor plate and washer into the rear seat access panel.
Tighten
^
Tighten the bolt to 55 N.m (41 lb ft).
8. Install the cover onto the rear seat access panel.
Regular Cab W/Bucket Seat