K 2500 Truck 4WD V8-305 5.0L VIN M SFI (1998)
Ball Joint: Service and Repair
Upper Ball Joint Replacement
REMOVAL PROCEDURE
^
Tools Required:
-
J 36607 Ball Joint Separator
1. Raise the vehicle. Support the vehicle with suitable safety stands.
2. Remove the tire and wheel assembly.
3. Remove the brake hose and the bracket (upper control arm only).
4. Using a 3.17 mm (1/8 in) drill, cut a 6.35 mm (1/4 in) deep hole in the center of each rivet.
5. Using a 12.7 mm (1/2 in) drill bit, drill away the rivet heads.
6. Using a pin punch, remove the rivets.