K 2500 Truck 4WD V8-305 5.0L VIN M SFI (1998)
1. Clean the control valve assembly thoroughly in clean solvent.
2. Move the valve with a pick or small screwdriver in order to dislodge any dirt or debris that may have accumulated.
3. Air dry.
DISASSEMBLE PROCEDURE
IMPORTANT: Valves, springs, and bushings must be laid out on a clean surface in the exact sequence they were removed.
1. Disassemble the pressure control solenoid retainer bolt, retainer, and solenoid.
2. Disassemble the bore plug retainer clip, bore plug, and valve train.
3. Disassemble the 2-3 shift solenoid retainer, solenoid, and valve train.
