K 2500 Truck 4WD V8-305 5.0L VIN M SFI (1998)
2. Pry the retainers from the seats using the
J 38778
3. Remove the map pocket from the trim panel.
Installation Procedure
1. Install the map pocket to the trim panel.
2. Snap the retainers into the seats.
3. Install the trim panel to the door.
Water Deflector
Water deflectors seal the inner panel. Water deflectors prevent water from entering into the body. A strip of adhesive between the deflector and the door
secures the deflector.
Removal Procedure
1. Remove the trim panel.
2. Remove the water deflector.
2.1 Pull the waterproof sealing tape from the deflector.
2.2 Using a flat-blade tool, break the bond between the sealer and the door.
Installation Procedure
1. Using waterproof tape or 3M(R) 777 (or equivalent), install the water deflector to the door.
2. Install the trim panel to the door.
Door Hardware Lubrication
The mechanical components of the door assembly are lubricated during assembly If additional lubrication is required to any door hardware mechanism
use Lubriplate Spray-Lube "A" GM P/N 1052349, Lubriplate Auto-Lube "A" GM P/N 1052196, or equivalent. Lubricate door hinge pins and
rollers at normal service intervals with 30 weight engine oil. Do not lubricate hinge roller to hold-open link contacting surfaces. This may prevent the
roller from rolling properly.
Inside Door Handle
