K 2500 Truck 4WD V8-305 5.0L VIN M SFI (1998)
1. Insert the hook of the wiper arm through the opening in the wiper blade.
2. Position the wiper blade pivot in the inside radius of the wiper arm hook.
3. Pull the wiper blade pivot into the wiper arm hook until the pivot locks into the hook.
4. Operate the wipers and check for proper operation.
Rear
REMOVAL PROCEDURE
1. Insert a narrow-bladed screwdriver into the release slot over the wiper blade retainer spring.
2. Pivot the screwdriver so that the blade tip presses downward on the retainer spring and releases the wiper blade from the pin of the wiper arm.
3. Remove the wiper blade from the wiper arm.
INSTALLATION PROCEDURE
1. Install the wiper blade on the wiper arm pin.
2. Snap the wiper blade into place.
