K 2500 Truck 4WD V8-350 5.7L VIN K TBI (1995)
Brake Rotor/Disc: Service and Repair
Rear
HUB AND DISC / DRUM ASSEMBLY REPLACEMENT
With Full Floating Axle (11 Inch Ring Gear)
TOOL REQUIRED:
-
J 2222-C Wheel bearing Nut wrench.
Fig. 6 Removing Or Installing Wheel Bearing Adjusting Nut
REMOVE OF DISCONNECT
-
Raise the vehicle until the wheel is free to rotate.
1. Tire and wheel assembly.
2. Axle shaft.
3. Nut using J2222-C, or retaining ring.