K 2500 Truck 4WD V8-350 5.7L VIN K TBI (1995)
Clutch Assembly And Pilot Bearing
Clutch Assembly (Dual Mass Flywheel)
INSTALL OR CONNECT
TOOL REQUIRED:
-
J 5824-01 Clutch Alignment Tool
-
Brass Drift or Equivalent
1. New pilot bearing if needed. Use Brass Drift or J 34140 as needed to drive the bearing in until the tool bottoms out.
-
Lubricate the bearing with a few drops of machine oil.
2. Driven plate and cover assembly.
