K 2500 Truck 4WD V8-379 6.2L DSL (1988)
Typical materials for this application would be: DuPont 2610S/2605S, BASF DP21/DH6O/PR80, PPG DP40/DP402 or equivalent.
V.O.C. materials for this application would be: DuPont 21255, PPG DPW1834 or equivalent.
12.
Apply two to three medium wet coats of color (or until primer color is hidden). Follow manufacturer's instructions and recommended dry times.
13.
If vehicle has basecoat/clearcoat paint, apply clearcoat. Follow manufacturer's instructions and recommended dry times.
14.
After sufficient air or force dry time, unmask the vehicle.
15.
Finesse/polish as required.
16. Reinstall all previously removed items.
17. Wash and prepare the vehicle for delivery.
HARDWARE ITEMS REMOVAL LIST
Note:
Some technicians may apply a small cord (wire, plastic tube, etc.) behind or underneath moldings that remain on the vehicle to improve sanding and
painting. If the vehicle paint system is baked with cord in place, damage to some moldings may occur. If this technique is used, DO NOT BAKE
PAINT air dry only
Note:
Only items marked with an asterisk are "add" conditions to the Major Operation being performed. Removal time for all other items listed is included
in the refinish time.
LIGHT DUTY TRUCKS
C/K TRUCKS
Grille
Front bumper filler
panel
Antenna
Tail lamps
Door edge guards
Metal wheel opening moldings
*Roof marker lamps
"Luggage rack
*West coast style mirrors
"Stripes
Emblems/decals if necessary
Swing out windows/seals
Tail gate handle bezel
S/T TRUCKS
Windshield molding
Bumper filler panels, Ft./Rr.
Wiper arms
Antenna
Wheel opening moldings
Cowl vent grille
Door edge guards
Side view mirrors
Tail lamps
*Wind deflector
Rear Window (Jimmy)
*Luggage rack
*Stripes
Emblems/decals if necessary
Swing out windows/seals
*Spare tire carrier and latch-external mount (Jimmy)