gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

Lifting - Jack Rattle|Page 1707 > < Malfunction Indicator Lamp Driver Module|Locations
Page 1
background image

Vehicle Lifting: Customer Interest
Lifting - Jack Rattle

NUMBER:

88-T-09

SECTION:

10 - Body Section

DATE:

March, 1987

SUBJECT:

JACK RATTLE

MODELS:

1988 C/K 10 SERIES

Some 1988 C/K 10 Series models may have jack assemblies that rattle when driven over rough roads. To repair this condition, the following procedure
should be used.

FIGURE NO. 1

1.

Cut one piece of 1/2 inch I.D. x 1-1/2 inch O.D. sponge pipe insulation 2-3/4 inches long as shown in Figure No. 1.

Notice:

Sponge pipe insulation is available from plumbing suppliers and hardware stores.

2.

Split sponge pipe insulation as shown in Figure No. 1.

FIGURE NO. 2

3.

Install insulation around jack screw as shown in Figure No. 2.

4.

Fold jack completely for storage

This condition was corrected in production beginning with the following VIN breakpoints.

Chevrolet

JE102527

GMC

JE500724

Chevrolet

J1105962

GMC

J1501914

Lifting - Jack Rattle|Page 1707 > < Malfunction Indicator Lamp Driver Module|Locations