K 2500 Truck 4WD V8-379 6.2L DSL (1988)
Fig. 1
^
Place new cover assembly halfway in reverse, Figure No. 1, and install new gasket and cover assembly to transmission. Torque bolts 34 N-m (25
ft.lbs.).
^
Reinstall transmission in vehicle. Transmission should be in reverse gear. Torque transmission to clutch housing bolts to 100 N-m (74 ft.lbs.).
^
Reinstall crossmember. Torque mounting bolts to 75 N-m (55 ft.lbs.).
^
Torque transmission mount to crossmember nuts to 47 N-m (35 ft.lbs.).
^
Reconnect wiring harness to transmission.
-
Reinstall transfer case to transmission adapter utilizing a new gasket. Torque bolts to 33 N-m (24 ft.lbs.).
^
Reconnect front propshaft. Torque flange bolts to 100 N-m (74 ft.lbs.).
^
Reconnect vent hose and wiring harness to transfer case.
^
Reconnect transfer case linkage.
^
Reinstall skid plate if previously removed.
^
Refill transfer case with Dexron (R) II Automatic Transmission Fluid part number 1051855 (approx. 1.2 quarts).
^
Refill transmission with SAE-80W GL5 or SAE-80W-90 GL5 gear lubricant part number 1052271 (approx. 4.2 quarts).
^
Lower vehicle.
