K 2500 Truck 4WD V8-379 6.2L DSL VIN C FI (1989)
Compressor Shaft Seal: Service and Repair
With R-4 Compressor
Remove or Disconnect
Tools Required:
J 5403 Snap Ring Pliers
J 9553-01 O-ring Remover
J 23128-A Seal Remover
Removing The Shaft Seal With J 23128-A
1. Retainer ring using J 32128-A into the recessed portion of the seal by turning the handle clockwise.
2. Shaft seal.
^
Engage the knurled tangs of J 23128-A into the recessed portion of the seal by turning the handle clockwise.
Removing And Installing The Shaft Seal
3. O-ring using J 9553-01.
Install or Connect
Tools Required:
J 5403 Snap Ring Pliers
J 23128-A Seal Installer
J 33011 O-ring Installer
J 34614 Seal Protector
