K 2500 Truck 4WD V8-393 6.5L DSL (1994)
Important
^
Check "Front Wheel Alignment Specifications" in the illustration for special requirements and alignment adjustments. Check trim height "Z"
and "D." Verify alignment specifications before proceeding.
Adjust
^
Caster and camber to the correct specifications by rotating the bolt head installed through adjuster cam.
Tighten
A. Front upper control arm nuts (50) to 190 N.m (140 lbs. ft.).
E. Rear upper control arm nuts (50) to 190 N.m (140 lbs. ft.).
^
Set steering wheel on center, with wheels straight, and loosen adjuster sleeve nuts.
Adjust
^
Toe-in, refer to the illustration.
Tighten
^
Tie rod adjuster sleeve nuts to 19 N.m (14 lbs. ft.).
^
Position clamps properly.
^
Recheck alignment specifications.
^
Lower the vehicle.
