K 2500 Truck 4WD V8-393 6.5L DSL (1994)
Steering Gear: Service and Repair
Manual Steering Gear - Saginaw Recirculation Ball
1. Place front wheels in straight ahead position.
2. Remove flexible coupling to steering shaft bolts.
3. Mark position of pitman arm to shaft and remove pitman shaft nut or pinch bolt, then pitman arm from shaft with a puller.
4. Loosen steering gear and remove.
5. Remove flexible coupling pinch bolt, then flexible coupling from steering gear wormshaft.
6. Reverse procedure to install.