K 2500 Truck 4WD V8-454 7.4L (1990)
Throttle Cable/Linkage: Service and Repair
Accelerator Pedal Assembly
Control Cable And Linkage
ACCELERATOR PEDAL:
When performing service on the accelerator pedal, observe the following:
^
The braided portion of the accelerator cable assembly must not come in contact with the front of the dash sealer during assembly, repair, or
replacement of the assembly.
^
The mounting surface between the support and dash panel must be free of insulation. The carpet and padding in the pedal and tunnel area must be
positioned to lay flat and be free of wrinkles and bunches.
^
Slip the accelerator control cable through the slot in the rod and then install the retainer in the rod, makeing sure it is seated. Use care when
