K 2500 Truck 4WD V8-454 7.4L VIN J SFI (1997)
Fig. 5 Installing Boot To Piston
3. Boot (8) on piston (9).
Seating The Boot In The Housing
4. Piston (9) and boot into caliper bore.
a. Push piston to the bottom of bore.
b. Seat boot in housing using tool No. J 36474, J 36475, J 38453 or equivalent.
5. Bleeder valve (11).
^
Tighten bleeder valve (11) to 13 Nm (115 inch lbs.).
