K 2500 Truck 4WD V8-454 7.4L VIN J SFI (1997)
Frame, Field And Brush Holder Group
IMPORTANT
-
If the drive end bushing and plug are being replaced, install them in the drive housing. Before proceeding with assembly, refer to "Drive End
Housing Bushing".
-
Lubricate the drive end housing bushing, shift lever, and driveshaft, refer to "Lubrication".
Frame, Field And Brush Holder Group
Drive Shaft And Clutch Group
INSTALL OR CONNECT
1. Arms on the shift lever with the shift collar onto the driveshaft and clutch group.
2. Assembled shift lever and driveshaft and clutch group into the drive housing.
Drive Shaft And Clutch Group
