gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

Shifter M/T > < New Venture Gear NV3500 Manual Transmission
Page 1
background image

Seals and Gaskets: Service and Repair
New Venture Gear NV4500 Manual Transmission

-

Tool Required:
-

J 22834 Extension Housing Seal Installer

REMOVE OR DISCONNECT

1. Raise the vehicle.
2. Transmission oil. 
3. Propeller shaft. 
4. Parking brake, if the vehicle is equipped. 
5. Yoke nut and washers.
6. Yoke.

7. Extension oil seal.

INSTALL OR CONNECT

1. New extension oil seal, using J 22834.
2. Yoke.
3. Washers and yoke nut.

-

Tighten yoke nut to 441 Nm (325 ft. lbs.).

4. Parking brake, if the vehicle is equipped. 
5. Propeller shaft. 
6. Transmission oil. 
7. Lower the vehicle.

Shifter M/T > < New Venture Gear NV3500 Manual Transmission