K 2500 Truck 4WD V8-454 7.4L VIN J SFI (1997)
Fluid - Transfer Case: Service and Repair
New Venture Gear 241 Transfer Case
REMOVE OR DISCONNECT
-
Raise and support the vehicle.
-
Place a container under the drain plug to catch the oil.
1. Fill plug.
2. Drain plug. Allow the oil to drain.
INSTALL OR CONNECT
1. Drain plug.
-
Tighten:
-
New Venture Gear drain plugs to 47 Nm (35 ft. lbs.).
2. Transfer case oil.
-
Fill the transfer case until the oil level is at the bottom of the oil fill plug hole.
3. Fill plug.
-
Tighten:
-
New Venture Gear fill plugs to 47 Nm (35 ft. lbs.).
4. Lower the vehicle.
