K 2500 Truck 4WD V8-454 7.4L VIN J SFI (1997)
1. Handle bezel from door trim panel.
A. Insert a flat blade tool between the door inside bezel and the handle assembly.
B. Carefully bend retaining clips outward while pulling out the bezel.
C. Disconnect the wiring connector (if equipped with power locks).
Install or Connect
1. Handle bezel to door trim panel.
A. Connect the wiring connector (if equipped with power locks).
B. Snap bezel into place.
Power Door Lock Switch
Power Door Lock Switch
Remove or Disconnect
1. Power Accessory Switch Plate.
2. Power door lock switch wiring connector:
3. Power door lock switch.
^
Carefully bend retaining tabs outward while pushing switch out of plate.
Install or Connect
1. Power door lock switch.
2. Power door lock switch wiring connector.
3. Power Accessory Switch Plate.
Courtesy Lamp
Remove or Disconnect
1. Trim panel.
2. Lamp from trim panel.
^
Disconnect wiring connector.
^
Carefully release lamp assembly retainers with a flat-blade tool.
Install or Connect
1. Lamp to trim panel.
^
Snap lamp assembly into trim panel.
^
Connect wiring connector.
2. Trim panel.
Map Pocket
