K 2500 Truck 4WD V8-5.3L VIN T (1999)
Drink Holders: Service and Repair
REMOVAL PROCEDURE
1. Tilt the cupholder down.
2. Remove the screws holding the cupholder to the Instrument Panel (IP).
3. Remove the cupholder from the vehicle.
INSTALLATION PROCEDURE
1. Position the cupholder to the IP.
2. Install the screws holding the cupholder to the IP.
Tighten
Tighten the screws to 2 N.m (18 lb in).
3. Return the cupholder to the up position.
