K 2500 Truck 4WD V8-5.3L VIN T (1999)
Power Seat Switch: Service and Repair
Seat Switch Bezel Replacement
REMOVAL PROCEDURE
1. Remove the lumbar knob, it equipped.
2. Remove the screws retaining the power seat switch bezel.
3. Transfer all the necessary components to the new seat switch bezel.
INSTALLATION PROCEDURE
1. Install the seat switch bezel.
2. Connect the electrical connector.
3. Install the screws retaining the power seat switch bezel.
Tighten
Tighten the screws to 2 N.m (18 lb in).
4. Install the lumbar knob, if equipped.
