K 2500 Truck 4WD V8-5.3L VIN T (1999)
Power Seat Switch: Service and Repair
Seat Switch Replacement - Power
REMOVAL PROCEDURE
1. Remove the lumbar knob, it equipped.
2. Remove the power seat switch bezel from the seat.
3. Disconnect the electrical connector(s).
4. Remove the power seat switch to bezel screws.
5. Remove the power seat switch.
INSTALLATION PROCEDURE
1. Install the power seat switch to bezel screws.
Tighten
Tighten the screws to 2 N.m (18 lb in).
2. Connect the electrical connector(s).
3. Install the power seat switch bezel to the seat.
4. Install the lumbar knob, if equipped.