K 2500 Truck 4WD V8-5.3L VIN T (1999)
Brake Caliper: Service and Repair
Brake Caliper Bracket Replacement
Brake Caliper Bracket Replacement - Front
REMOVAL PROCEDURE
1. Remove 2/3 of the brake fluid from the master cylinder.
2. Raise and support the vehicle.
3. Remove the tire and wheel assembly.
4. Remove the caliper.
5. Remove the caliper mounting bracket from the steering knuckle assembly.
6. Inspect the caliper mounting bracket.
INSTALLATION PROCEDURE
1. Install the caliper mounting bracket to the steering knuckle assembly.
2. Install the caliper.
3. Install the tire and wheel assembly.
4. Remove the safety stands.
5. Lower the vehicle.
6. Pump the brake pedal slowly and firmly in order to seat the brake pads.
Brake Caliper Bracket Replacement - Rear
REMOVAL PROCEDURE
1. Remove 2/3 of the brake fluid from the master cylinder.
2. Raise and support the vehicle.
3. Remove the tire and wheel assembly.
4. Inspect the caliper operation.