K 2500 Truck 4WD V8-5.3L VIN T (1999)
5. Remove the master cylinder mounting nuts.
6. Remove the master cylinder.
INSTALLATION PROCEDURE
Before you install the master cylinder, bench bleed the master cylinder.
1. Install the master cylinder
NOTICE: Refer to Fastener Notice in Service Precautions.
2. Install the master cylinder mounting nuts.
-
/Tighten the nuts to 36 Nm (27 ft. lbs.).
3. Remove the pipe caps.
4. Connect the brake pipes.
-
Tighten the fittings to 25 Nm (18 ft. lbs.).
5. Connect the electrical connection at the brake fluid level sensor.
6. Bleed the brakes.
7. Release the parking brake.