K 2500 Truck 4WD V8-5.3L VIN T (1999)
Parking Brake Shoe: Service and Repair
REMOVAL PROCEDURE
1. Raise and support the vehicle.
2. Remove the tire and the wheel.
3. Remove the caliper and mounting bracket as an assembly.
4. Relieve the tension on the park brake cables by loosening the nut at the equalizer
5. Remove the parking brake cable from the lever.
6. Remove the rotor.
7. Remove the axle shaft.
8. Remove the rear hub assembly.
9. Remove the park brake shoe return springs (4 and 6).
10. Remove the park brake shoe anchor springs and pins (3).
11. Remove the park brake shoes (2).
INSTALLATION PROCEDURE
