K 2500 Truck 4WD V8-5.3L VIN T (1999)
Fog/Driving Lamp Switch: Service and Repair
REMOVAL PROCEDURE
Caution: Refer to Battery Disconnect Caution in Cautions and Notices.
1. Disconnect the negative battery cable.
2. Remove the instrument cluster bezel.
3. Unsnap the fog lamp switch from the housing.
4. Disconnect the electrical connectors.
5. Remove the fog lamp switch.
INSTALLATION PROCEDURE
1. Connect the electrical connectors.
2. Install the foglamp switch by snapping the switch into place.
3. Install the bezel to the instrument panel.
4. Connect the negative battery cable.
