K 2500 Truck 4WD V8-5.3L VIN T (1999)
5. Turn the steering wheel 180 degrees in order to access the remaining access holes.
6. Insert a screwdriver into the remaining access holes and push the seat spring to release the notched pin that retains the inflator module.
7. Tilt the top of the inflator module rearward to gain access to the SIR wiring.
8. Disconnect the SIR lead wire from the clip on the inflator module.
9. Disconnect the SIR lead wire from the clip on the steering wheel.
10. Disconnect the Connector Position Assurance retainer.
11. Disconnect the electrical connector.
Caution: Refer to Inflator Module Handling Caution in Cautions and Notices.
12. Remove the inflator module.
Installation Procedure