K 2500 Truck 4WD V8-5.3L VIN T (1999)
-
Tighten the coupler clamp bolt to 45 Nm (33 ft. lbs.).
5. Install the power steering low pressure hose (2) to the rack and pinion assembly (3).
6. Install the power steering high pressure hose (1) to the rack and pinion assembly (3).
-
Tighten the pressure hoses to 27 Nm (28 ft. lbs.).
7. Install the engine shield.
8. Install the stabilizer shaft.
9. Install both of the front tire and wheel assemblies.
10. Lower the vehicle.
11. Bleed the power steering system.
