K 2500 Truck 4WD V8-5.3L VIN T (1999)
Torsion Bar: Service and Repair
Torsion Bar Replacement
REMOVAL PROCEDURE
^
Tools Required
-
J 36202 Torsion Bar Unloading/Loading Tool.
IMPORTANT: This procedure requires the removal of both torsion bars.
1. Raise and support the vehicle.
2. Mark the adjustment bolt setting.
3. Install J 36202 to the adjustment arm and the crossmember
4. Increase the tension on the adjustment arm until the load is removed from the adjustment bolt and the adjuster nut.
5. Remove the adjustment bolt (3) and the adjuster nut (4) (15 Series).
