K 2500 Truck 4WD V8-5.3L VIN T (1999)
Windshield: Service and Repair
REMOVAL PROCEDURE
Tools Required
J 24402-A Glass Sealant (cold knife) Remover
CAUTION: If broken glass falls into the defroster outlets, it can be blown into the passenger compartment and cause injuries. To help
avoid personal injury, cover the defroster outlets before replacing windows.
Place protective coverings around the window removal area in order to perform the following step:
1. Remove the rear view mirror.
2. Remove the antenna mast.
3. Remove the windshield wiper arms.
4. Remove the cowl air inlet grill panel.
5. Reposition the front door weatherstrips in order to access the reveal moldings.
6. Remove the reveal moldings.
7. Remove the upper windshield molding by cutting the molding with a utility knife.
